Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

基于最大熵模型的福建省红树林潜在适生区评估

本研究利用生物气候、地形、底质类型、海温等环境因子和红树林分布数据建立了福建省红树林分布模型,基于最大熵方法分析了福建省沿岸红树林潜在适生区的空间分布.根据模型输出结果对福建省红树林的生境适宜性进行了评估,识别了影响红树林分布的关键环境因子及其适生值区间,并通过空间叠加分析获取了福建省红树林保护与修复的优先区与空缺区域.结果表明,影响福建省红树林适生区分布格局的主要环境因子包括海表温度、气温和降水等,福建省红树林潜在适生区主要位于沙埕港-三沙湾-兴化湾沿岸、泉州湾-厦门湾-九龙江口沿岸、漳江口-东山湾沿岸等地,其中最优适生区面积约为91km².全省共识别出8处红树林保护与修复的优先区域,现存红树林保护率约为64.4%,保护修复空缺主要出现在沙埕港、三沙湾、罗源湾、福清湾等处,研究结论可为未来福建省红树林保护和修复行动提供科学参考.     

典型西南工业城市春冬季PM2.5来源与潜在源区分析——以柳州市为例

为了揭示柳州城区春冬季PM_2.5的来源及其潜在源区分布和贡献,利用2018年24h自动监测数据和气象数据对柳州市大气污染物浓度变化特征进行了分析,并且使用后向轨迹模型（HYSPLIT）对春冬季柳州市PM_2.5逐日72h气流后向轨迹和前向轨迹进行聚类分析,同时结合潜在源贡献因子分析法（WPSCF）和轨迹浓度权重法（WCWT）对其潜在源区和浓度贡献进行了分析.结果显示,（1）在研究期内,不利的主导风向和工业区布局导致研究区PM_2.5在春冬季污染较严重,且工业源和交通源是其主要本地来源;（2）春冬季PM_2.5高值主要来源于西北和东南方向,其中,西北向PM_2.5主要来源于本地排放,且浓度在空间上呈现西高东低的趋势;（3）春季后向轨迹PM_2.5浓度整体大于冬季,春冬季中对柳州市PM_2.5影响最大轨迹均来自东部的短距离输送,而来自西北的气流轨迹输对PM_2.5贡献最低.春冬季柳州市大气PM_2.5通过气流传输对贵州地区大气环境有较大影响;（4）春季,柳州市PM_2.5的主要潜在源区分布在广西东南部、广东中西部、南海沿岸海域、湖南中部、江西西北部、湖北东部及安徽西北部;冬季,主要分布在广西东南部、广东西南部和南海沿岸海域.     

含菌气溶胶扩散对人群的潜在影响风险

为分析生物气溶胶释放对人群潜在影响风险的情况,利用CALPUFF模型定量模拟了2019年7月24~8月20日中牧兰州生物药厂含菌气溶胶扩散、浓度空间分布、对人群潜在健康风险,并结合公开报道的检测数据开展验证.结果显示：生物药厂的含菌气溶胶排放源附近高值区主要集中于厂区四周,影响范围主要以厂区为中心,并向四周逐渐扩散;检测结果中兰州兽研所1#,兰州大学2#地区健康风险比例41.49：1,在模拟的相对风险大小的误差区间（36.15±8.48）范围内,说明本研究含菌气溶胶对人群潜在影响风险的模拟结果可信.     

黄河流域生态环境保护投资分析及优化建议

以黄河流域生态环保投资为研究对象,统计并分析近年来全社会和中央财政投入情况,从时间、空间和领域3个维度分析变化趋势,发现存在投资总量不足、效益跨区域外部性、地方投入渠道受制约等问题。从政府、企业、社会和金融机构4个主体层次分别提出相应的对策建议,以期为保障黄河流域生态环保资金投入提供支撑。     

能源作物甜高粱对镉污染农田的修复潜力研究

通过田间控制试验,研究在不同镉污染条件下甜高粱对镉的吸收和积累规律,并采用先进固态发酵(ASSF)技术对甜高粱进行能源化利用,阐明能源植物甜高粱对镉污染农田的修复潜力.结果表明:甜高粱对镉具有较强的吸收能力和耐性,在不同浓度的镉处理条件下,均可以完成正常生育期(167 d),但当土壤镉含量达到33 mg·kg~(-1)时其生长受到显著抑制.在甜高粱植株内,根部的镉浓度最高,呈现根茎叶籽粒的分布特点,单株镉的积累量最高可达到0.84 mg(土壤镉含量为18 mg·kg~(-1)).甜高粱对镉的吸收与土壤中的镉含量具有显著的线性关系(P0.05),随着土壤中镉含量的增加显著增加,但是镉处理对甜高粱茎秆的糖和水分含量,以及发酵过程中糖利用率和乙醇转化率均没有影响.因此,在镉污染农田上种植甜高粱,可以确保生产的产品不进入食物链而进入能源产业链,既可以生产生物乙醇的原材料,产生经济效益,又可以吸收土壤中镉,实现对镉污染农田的边生产边修复.     

辽东湾潜在褐潮生物时空分布及环境关联

以18S rDNA V4区作为目标基因,利用自行设计的真核浮游植物鉴定引物V4（F/R）,结合高通量测序技术,对辽东湾2014年四季海水中真核浮游植物多样性进行了检测.结果发现了8种潜在褐潮生物：抑食金球藻、金牛微球藻、微拟球藻、颗粒微拟球藻、细小微胞藻、密球藻、普通小球藻、钙质角毛藻,其中前2种生态风险较高,主要分布在辽东湾西南、东南两侧.除抑食金球藻和细小微胞藻为混合营养型外,其他6种均为自养型.细小微胞藻丰度最高（平均161445个/L）,主要分布在秋季;其次是抑食金球藻、金牛微球藻（平均13912,13717个/L）,主要分布在春季;之后为钙质角毛藻、普通小球藻（平均5498,5234个/L）,主要分布在秋季;密球藻（平均1345个/L）,主要分布在夏季;微拟球藻、颗粒微拟球藻最少（平均56,44个/L）,冬季无分布.辽东湾潜在褐潮生物丰度与水温、水深、无机氮、N/P显著相关,其群落结构演替与环境因子关联性有待于进一步研究.